GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1838957  Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
  2. Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.

  3. Object Number: 1838002  Size: SH
  4. Remove the air cleaner housing rear bolt.
  5. Reposition the air conditioning (A/C) condenser and evaporator tube clamp as required.

  6. Object Number: 1838005  Size: SH
  7. Remove the air cleaner assembly from the upper tie bar.

Installation Procedure


    Object Number: 1838005  Size: SH
  1. Install the air cleaner assembly to the upper tie bar.

  2. Object Number: 1838002  Size: SH
  3. Position the A/C condenser and evaporator tube clamp as required.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the air cleaner housing rear bolt and tighten to 10 N·m (89 lb in).

  6. Object Number: 1838957  Size: SH
  7. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  8. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.