GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Saturn
🢒
2009
🢒
AURA
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Air Cleaner Element Replacement
Removal Procedure
Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor.
Loosen the air cleaner outlet duct clamp at the air cleaner assembly.
Remove the air cleaner outlet duct from the air cleaner assembly.
Disengage the air cleaner cover latches (1).
Open the air cleaner cover.
Remove and discard the air filter assembly.
Installation Procedure
Install a NEW air filter assembly.
Close the air cleaner cover.
Engage the air cleaner cover latches (1).
Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
Install the air cleaner outlet duct to the air cleaner assembly.
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the air cleaner outlet duct clamp at the air cleaner assembly to
4 N·m (35 lb in)
.