For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
- Disconnect the stabilizer link from the stabilizer shaft.
- Disconnect the stabilizer link from the strut assembly and remove from the vehicle.
Installation Procedure
- Connect the stabilizer link to the strut assembly and tighten to 65 N·m (48 lb ft).
- Connect the stabilizer link to the stabilizer shaft and tighten to 65 N·m (48 lb ft).
- Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
