Preliminary Procedure

Remove rear door switch bezel. Refer to Rear Side Door Window Switch Bezel Replacement.

1

Rear Side Door Trim Push-in Retainer (Qty: 2)

2

Rear Side Door Inside Handle Bolt Cap

3

Rear Side Door Inside Handle Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

4

Rear Side Door Trim Panel Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

5

Rear Side Door Trim Panel Assembly

Procedure

1. Use a J 38778 to aid in the removal of the door trim panel.
2. Pull upwards on the door lock retainer cable to disengage.
3. Disconnect the electrical connectors.

Special Tools

J 38778 Door Trim Pad Clip Remover

6

Rear Side Door Trim Panel Retainer (Qty: 7)