Preliminary Procedure

Open both doors on the side the lower rocker molding is being serviced from in order to remove the molding.

1

Rocker Panel Molding

2

Rocker Panel Integral Retention Clip (Qty: 17)

Tip
Using a J 38778 release the lower clips first then followed by the upper retention clips.

Special Tools

J 38778 Door Trim Pad Clip Remover

3

Rocker Panel Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)