Preliminary Procedures

1. Remove the rear wheelhouse liner panels. Refer to Rear Wheelhouse Panel Liner Replacement.
2. Remove the tail lamps. Refer to Tail Lamp Replacement.

1

Rear Bumper Fascia Plastic Retainer (Qty: 2)

2

Rear Bumper Fascia Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

3

Rear Bumper Fascia

Procedure

1. Disconnect any electrical connectors as needed.
2. Pull gently on the sides of the rear bumper fascia to disengage from the rear quarter panels.
3. Use a flat bladed tool to release the 2 integral snaps under each tail lamp to support bracket
4. Transfer any parts as needed.