- Open the sunshade.
- Close the sunroof window.
- Loosen the 3 adjusting screws on each side of the sunroof window.
- Adjust the corners of the window panel (3) using the following guidelines:
• | Adjust the front of the sunroof window (2) flush to 1 mm (0.04 in) below the top surface of the roof panel. |
• | Adjust the rear of the sunroof window (1) flush to 1 mm (0.04 in) above the top surface of the roof panel. |
Caution: Refer to Fastener Caution in the Preface section.
- Install the sunroof window adjustment screws and tighten to
4 N·m (35 lb in).
- Inspect the sunroof for proper operation.