GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.

  1. Place the seat in the full up position to relieve tension on the motor.
  2. Remove the front seat. Refer to Front Seat Replacement - Bucket.

  3. Object Number: 1331082  Size: SH
  4. Disconnect the electrical connectors.

  5. Object Number: 1331080  Size: SH
  6. Remove the seat motor fastener.

  7. Object Number: 1331083  Size: SH
  8. Remove the seat motor roll pin.

  9. Object Number: 1331085  Size: SH
  10. Remove the seat motor.

Installation Procedure


    Object Number: 1331085  Size: SH
  1. Install the seat motor.

  2. Object Number: 1331083  Size: SH
  3. Install the seat motor roll pin.
  4. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1331080  Size: SH
  5. Install the seat motor fastener.
  6. Tighten
    Tighten the fastener to 7 N·m (62 lb in).


    Object Number: 1331082  Size: SH
  7. Connect the electrical connectors.
  8. Install the front seat. Refer to Front Seat Replacement - Bucket.
  9. Verify that the seat operates correctly.