Preliminary Procedures

1. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement.
2. Remove the hood release handle. Refer to Hood Primary Latch Release Cable Handle Replacement.
3. Remove the steering column. Refer to Steering Column Replacement.
4. Remove the brake pedal assembly. Refer to Brake Pedal Assembly Replacement.
5. Remove the body control module bracket. Refer to Body Control Module Replacement.

1

I/P Reinforcement Assembly Bolt (Qty: 6)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

I/P Lower Bracket Bolt (Qty: 4)

Tighten
9 N·m (80 lb in)

3

I/P Reinforcement Assembly

Procedure

1. Note location and routing of the I/P wiring harness prior to removal of the I/P reinforcement assembly to ensure proper reinstallation.
2. Disconnect the wiring harness from the I/P reinforcement assembly.
3. With the aid of an assistant, remove the I/P reinforcement assembly from the vehicle.
4. If replacing the I/P reinforcement assembly, transfer all necessary components.