Preliminary Procedures

1. Remove the left instrument panel (I/P) closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
2. Remove the left outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.
3. Remove the I/P center molding removal. Refer to Instrument Panel Center Molding Replacement.
4. Remove the console assembly. Refer to Console Replacement.

1

Knee Bolster Assembly Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Knee Bolster Assembly

Procedure

1. Disconnect the electrical connections.
2. If replacing the knee bolster, transfer all necessary components.

3

Retainer Clip (Qty: 6)