Exhaust Manifold Heat Shield Replacement LAT

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
2. Disconnect the engine wiring harness electrical connector (1) from the heater coolant pump (2).



3. Remove the exhaust manifold heat shield bolt (3) securing the heater coolant pump bracket.
4. Reposition and secure the heater coolant pump (1) and bracket out of the way.



5. Remove the remaining exhaust manifold heat shield bolts (1).
6. Remove the exhaust manifold heat shield (2).

1. Install the exhaust manifold heat shield (2) onto the manifold.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 2 exhaust manifold heat shield bolts (1) and tighten to 23 N·m (17 lb ft).




Note: Ensure that the heater coolant pump bracket tabs (2) are positioned on either side of the heat shield bracket.

3. Position the heater coolant pump (1) and bracket to the heat shield bracket.
4. Install the remaining exhaust manifold heat shield bolt (3) and tighten to 23 N·m (17 lb ft).



5. Connect the engine wiring harness electrical connector (1) to the heater coolant pump (2).
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.

Exhaust Manifold Heat Shield Replacement LE5 With MH8