For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC C1FFF 00: Electronic Brake Control Module (EBCM) Indicated Hardware MalfunctionCircuit/System Description
The engine control module (ECM) detects the EBCM has an internal malfunction.
Conditions for Running the DTC
Ignition ON.
Conditions for Setting the DTC
An internal EBCM Malfunction exists.
Action Taken When the DTC Sets
| • | The antilock brake system (ABS) and vehicle stability enhancement system (VSES) are disabled. |
| • | The warning indicators will illuminate. |
Conditions for Clearing the DTC
| • | The condition for the DTC is no longer present. |
| • | The ECM clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles. |
Reference Information
Schematic Reference
Antilock Brake System Schematics
Connector End View Reference
Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Verify DTC C1FFF is not current.
| ⇒ | If the DTC is current, replace the EBCM |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for EBCM replacement, setup and programming
