GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the cover of the diagnostic connection.
  2. Remove the parking brake lever boot.

  3. Object Number: 1937845  Size: MF
  4. Remove the yaw rate/acceleration sensor.
  5. • Disconnect the wiring harness plug (2).
    • Remove the 2 nuts (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the yaw rate/acceleration sensor.
  2. Tighten
    Tighten the 2 yaw rate/acceleration sensor nuts to 10 N·m (89 lb in).

  3. Connect the wiring harness plug.
  4. Install the parking brake lever boot.
  5. Install the cover of the diagnostic connection.