GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1944541  Size: LF
  1. Remove the panel for the microphone (2) and the panel for the sliding sun roof control unit (3).
  2. Release using a suitable tool (screwdriver).

  3. Release the lens from the interior lamp (1).

  4. Object Number: 1941091  Size: LF
  5. Remove the front interior lamp holder.
  6. • Remove the 2 bolts (1).
    • Release the holders (4) all around.
    • Release the wiring harness holder (2).
    • Disconnect the wiring harness plug (3).

    Object Number: 1945963  Size: LF
  7. Remove the microphone.
  8. • Disconnect the compact plug (1).
    • Release and disconnect the wiring harness at the compact plug (arrow).
    • Disconnect and remove the microphone (2).

Installation Procedure

  1. Install the microphone.
  2. • Install in the microphone.
    • Connect the wiring harness plug.
    • Connect the compact plug.

    Notice: Refer to Fastener Notice in the Preface section.

  3. Install the interior lamp holder.
  4. • Install the 4 retaining lugs.

    Tighten
    Tighten the 2 screws to 2.5 N·m (22 lb in).

    • Connect the wiring harness plug into the holder.
    • Connect and lock the 2 wiring harness plugs.
  5. Install the panel for the sunshade actuation switch.
  6. Install the microphone cover.
  7. Install the lens for the front interior lamp.