GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the heating/air conditioning control. Refer to Heater and Air Conditioning Control Replacement.

  2. Object Number: 1936990  Size: LH
  3. Remove the accessory panel on instrument panel (I/P) padding.
  4. 2.1. Remove the 2 bolts (1).
    2.2. Remove the panel.
    2.3. Disconnect the wiring harness plug (2).
    2.4. Release and disconnect the wiring harness plug.

    Object Number: 1938388  Size: LH
  5. Remove the accessory panel.
  6. Release the 2 locks (1).

Installation Procedure

  1. Install the accessory panel.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the accessory panel on I/P padding.
  4. • Connect the wiring harness plug.
    • Install the accessory trim panel.

    Tighten
    Tighten the 2 bolts to 2.5 N·m (22 lb in).

  5. Install heating/air conditioning unit control. Refer to Heater and Air Conditioning Control Replacement.