Removal Procedure
Important:
| • | The fuel tank must be drained with a suitable, commercially-available fuel removal unit and suction hose - follow safety regulations and national legislation. The fuel tank is fitted with a refill limit float valve. This is located on the filler
neck in the fuel tank. To prevent damaging the refill limit float valve, a suitable suction hose must be used. |
| • | In the presence of fuel vapors or escaping fuel - observe safety regulations and national legislation. Store drained fuel in a suitable, sealable container. |
- Remove the fuel tank. Refer to
Fuel Tank Replacement
.
Important: Do not pull on the shaft of fuel tank sensor.
- Remove the fuel tank sensor (1).
| • | Release the 2 retainers (3). |
| • | Carefully pull from guide upward . |
| | Important: The wire connectors are to be pulled out carefully for disassembling of the connection wires.
|
| • | Disconnect the 2 wires. |
| | Important: The cable connectors is to be depressed by a blunt rod-shaped article.
|
| • | Depress the 2 snap-on tongue (arrows) of the cable connectors . |
Installation Procedure
Important: Do not pull on shaft of fuel tank sensor.
- Install the fuel tank sensor.
| • | Carefully pull in guide downward. |
| | Important: The wire connectors are to be pulled in carefully for disassembling of the connection wires.
|
- Install the fuel tank. Refer to
Fuel Tank Replacement
.
