GM Service Manual Online
For 1990-2009 cars only

Front Side Door Window Channel Replacement Sedan

Removal Procedure

    Caution: Refer to Express Down Feature Caution in the Preface section.


    Object Number: 1937550  Size: LF
  1. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Partly loosen water vapor barrier.
  3. • Remove the 2 front door retainer base inner panel.
    • Loosen the water vapor barrier in the area of the hatching.

    Object Number: 1937551  Size: SH
  4. Drill out the window channel.
  5. Drill out the 2 rivets.

  6. Remove the window channel.

Installation Procedure

    Important: Observe installation direction.

  1. Install the rear front door window channel.
  2. • Rivet on 2 rivets.
    • Position in lower guide rail.
  3. Install the water vapor barrier.
  4. Install the 2 front door retainer base inner panel.

  5. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .

Front Side Door Window Channel Replacement Coupe

Removal Procedure

    Caution: Refer to Express Down Feature Caution in the Preface section.

  1. Lower the window.
  2. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .

  3. Object Number: 1937550  Size: LF
  4. Partly loosen the water vapor barrier.
  5. • Remove the 2 holding angles.
    • Remove the 2 pins.

    Object Number: 1937556  Size: SH

    Important: Remove the window channel weatherstrip from inside with the appropriate tool.

  6. Remove the outer belt sealing strip
  7. • Remove the window channel weatherstrip from the rear window frame bracket.
    • Remove the fastening clip from the outer window frames.

    Object Number: 1937551  Size: SH
  8. Remove the rear window channel.
  9. Drill out the 2 blind rivets.

  10. Remove the rear window channel.

Installation Procedure

  1. Position the rear window channel.
  2. Install the rear window channel.
  3. Rivet on 2 blind rivets.

  4. Install the outer belt sealing strip.
  5. • Install the fastening clip on the outer window frame.
    • Install the window channel weatherstrip in the window channel bracket.
    • Install the window belt sealing strip onto the door folding.
  6. Fasten the water vapor barrier.
  7. • Install the 2 holding angles.
    • Install the 2 pins.
  8. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
  9. Close the window.