Special Tools
KM-6037
Adapter
- Install the front differential assembly (13) into the transmission case assembly (17).
- Install the torque converter housing (10) onto the transmission case assembly.
- Temporally tighten the 15 torque converter housing bolts (801, 802, 813). Torque the bolts uniformly.
Tighten
Tighen bolts to 30 N·m (22 lb ft).
- Rotate the differential in both directions to snug the bearing down.
- Using
KM-6037
and a torque meter, measure the preload (at starting) of the side bearings.
Specifications
• | Starting Torque (New Bearing) 0.78-1.37 N·m (6.90-12.13 lb in) |
• | Starting Torque (Reused Bearing) 0.39-0.69 N·m (3.45-6.11 lb in) |
- If the preload is not within specification, remove the differential from the transaxle case. Re-select adjusting shim. Refer to
Shim Size Specifications
.