Removal Procedure
- Remove the front floor console cover (1).
- Carefully remove the selector lever knob (2) from selector lever cover.
Slide the knob upwards
- Remove the selector lever cover from the front floor console.
Remove the 2 bolts (1).
- Remove the storage compartment front floor console (1) from the selector lever cover (2).
4.1. | Carefully push the selector lever cover (arrows) outwards. |
4.2. | Push the selector lever cover in the direction of the parking brake lever. |
4.3. | Disconnect the wiring harness plug. |
Installation Procedure
- Install the storage compartment front floor console to the selector lever cover.
Connect the wiring harness plug.
Notice: Refer to Fastener Notice in the Preface section.
- Install the selector lever cover to the front floor console.
Tighten
Tighten the 2 bolts to 2.5 N·m (22 lb in).
- Install the selector lever knob to the selector lever cover.
- Install the front floor console cover.