GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1941092  Size: SH
  1. Disconnect the battery.
  2. • Disconnect the negative cable.
    • Disconnect the positive cable.
  3. Remove the battery holder (1).
  4. Remove the bolt.

  5. Remove the battery.

Installation Procedure

  1. Install the battery.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the battery holder.
  4. Tighten
    Tighten the bolt to 7 N·m (62 lb in).

  5. Connect the battery.
  6. • Connect the positive cable.
    • Connect the negative cable.
  7. For programming procedures, refer to Control Module References.