GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1998474  Size: LH
  1. Disconnect the battery.
  2. Remove the battery shield.
  3. • Remove the bolt (3).
    • Remove the 2 shields (1) from the battery carrier.

    Object Number: 1941092  Size: SH
  4. Remove the battery holder (1).
  5. Remove the bolt.

  6. Remove the battery.

  7. Object Number: 1936907  Size: SH
  8. Remove battery carrier.
  9. • Disconnect the 2 cable ties (1).
    • Remove the 3 bolts (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.

  1. Install the battery carrier.
  2. Tighten
    Tighten the 3 bolts to 15 N·m (11 lb ft).

  3. Install the 2 cable ties.
  4. Insert the battery.
  5. Install the battery shield.
  6. Install the 2 shield, battery carrier.

    Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the battery holder.
  8. Tighten
    Tighten the bolt to 7 N·m (62 lb in).

  9. Connect the battery.
  10. • Connect the positive cable.
    • Connect the ground cable.
  11. For programming procedures, refer to Control Module References.