- Remove the oil pressure switch (1).
- Remove the bolt (1) and the oil pressure control valve.
- Remove the spring (3) and piston (2).
- Clean the components.
- Inspect the components.
- Clean the thread (4).
- Remove the oil pan.
- Remove the bolt (1) and the excess pressure valve.
- Remove the spring (2) and piston (3).
- Clean the components.
- Inspect the components.
- Clean the thread.
- Disconnect the wiring harness connector (3).
- Unclip the wiring harness (2) from the bracket.
- Remove the mixture regulator oxygen sensor (1).
- Remove the crankshaft pulse pick-up.
- Disconnect the catalytic converter control oxygen sensor wiring harness plug.
- Unclip the wiring harness plug (1) from the bracket.
- Remove the 2 bolts (3).
- Remove the intake manifold support (2).
- Remove the knock sensor wiring harness plug (1).
- Remove the knock sensor bolt (2) and the knock sensor.
- Disconnect the wiring harness plug (2).
- Unlock the retaining clamp (1).
- Remove the coolant temperature sensor.