GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 Astra 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Steering Wheel Control Switch Assembly Replacement

Removal Procedure
  1. Turn the steering wheel from the straight-ahead position by 90 degrees to the left.

    2. Object Number: 1950613 Size: SH
  2. Release the steering wheel control switch panel.

    3. Remove the bolt (1).

  3. Turn the steering wheel from the straight ahead position by 90 degrees to the right.

    4. Object Number: 1950614 Size: LH
  4. Remove the panel of the steering wheel control switch panel.

    5. Remove the panel in the direction of the arrow.


    Object Number: 1950615 Size: LH
  5. Remove the switch plate.
    6. • Release the switch plate.
    • Disconnect the wiring harness plug.
  6. The second switch is removed and installed similar.

Installation Procedure
  1. Install the switch plate.
    2. • Connect the wiring harness plug.
    • Install the switch plate.
  2. Install the steering wheel control switch panel.

    3. Install the panel in position.

    Caution: Refer to Fastener Caution in the Preface section.

  3. Install the steering wheel control switch panel.

    4. Tighten
    Tighten the bolt 2.5 N·m (22 lb in).