Removal Procedure
- Raise the vehicle.
- Remove the wiring harness of the barometric pressure sensor (1).
ā¢ | Remove the wiring harness plug (2). |
ā¢ | Remove the 1 or 2 cable ties (3). |
- Remove the barometric pressure sensor (1).
Remove the bolt (2).
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the barometric pressure sensor.
Tighten
Tighten the bolt to 5 NĀ·m (44 lb in).
- Install the wiring harness of the barometric pressure sensor.
ā¢ | Install the wiring harness plug. |
ā¢ | Install the cable ties. |
- Lower the vehicle.