Headlamp Bulb Replacement without High Intensity
Removal Procedure
Warning: Refer to Halogen Bulb Warning in the Preface section.
- Open the access panel in the wheelhouse liner.
- Remove the cover access on the headlamp.
Note: Release the lamp holder by twisting (arrow).
- Remove the lamp holder.
- Disconnect the lamp.
• | Release the 2 clips (1). |
• | Disconnect the wiring harness plug (2). |
Installation Procedure
- Connect the lamp.
Connect the wiring harness plug.
- Install the lamp holder.
Note: Ensure correct position of the access panel.
- Install the access cover on the headlamp.
- Close the access panel in the wheelhouse liner.