GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the battery.
  2. Remove the positive and negative cables.

  3. Wait 1 minute for the airbag to deactivate.
  4. Remove the battery.
  5. Remove the bolt.


    Object Number: 1937634  Size: LH
  6. Remove the airbag sensor.
  7. • Remove the 2 bolts (1).
    • Disconnect the wiring harness plug and remove the sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.

  1. Install the airbag sensor.
  2. Insert the sensor and connect the wiring harness plug.

    Tighten
    Tighten the 2 bolts to 6 N·m (53 lb in).

  3. Install the battery.
  4. Connect the battery.
  5. Tighten
    Tighten the bolt to 5 N·m (44 lb in).

  6. Perform the readiness inspection.
  7. For programming procedures, refer to Control Module References.