Headlamp Leveling Control Module Replacement for Saturn Astra 2009
Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
Note: When replacing the headlamp leveling module, before removing the control unit, carry out a "Reset" using TECH 2. For reprogramming procedures, refer to
Control Module References.
- Disconnect the battery.
- Remove the drivers knee bolster. Refer to
Driver Knee Bolster Replacement.
- Remove the headlamp leveling module.
| • | Remove the headlamp leveling module. |
| • | Disconnect the wiring harness plug (2). |
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Position the headlamp leveling module.
| • | Connect the wiring harness plug. |
| • | Install the headlamp leveling module. |
Tighten
| • | Tighten the bolt to 2.5 N·m (22 lb in).
|
| • | Tighten the nut to 2.5 N·m (22 lb in).
|
- Install the drivers knee bolster. Refer to
Driver Knee Bolster Replacement.
- Connect the battery.
- For reprogramming procedures, refer to
Control Module References.