Removal Procedure
- Position the transmission control lever into 4th gear.
- Release the bolt (1) for the relay point clamp.
Disconnect the relay point from the selector lever lever.
- Disconnect the selector lever boot (2) from the bulkhead.
Installation Procedure
Important: Push the lever boot onto the gearshift rod without twisting it.
- Attach the selector lever boot (2) to the bulkhead.
Important: Do not tighten the clamping screw (1).
- Attach the transmission relay point to the selector lever.
- Adjust the transmission selector lever link. Refer to
Selector Lever Link Adjustment
.