GM Service Manual Online
For 1990-2009 cars only

Special Tools

    • DT 46414 Driver
    • EN 46342 Driver Handle

For equivalent regional tools, refer to Special Tools.


    Object Number: 2002594  Size: SH
  1. Install the front differentail transfer drive gear front thrust bearing assembly (262).
  2. Using DT 46414 driver  (2) and EN 46342 driver handle  (1) install the front differential drive gear assembly bearing (808).
  3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2002592  Size: SH
  4. Install the front differential transfer drive gear assembly bearing retainer (806) and tighten the front differential transfer drive gear assembly bearing retainer bolt (807). Tighten to 13 N·m (115 lb in).

  5. Object Number: 2002591  Size: SH
  6. Place the 3 chip collector magnets (812) on the transmission fluid baffle (811).

  7. Object Number: 2002590  Size: SH
  8. Install the transmission fluid baffle (811) and tighten the 3 fluid baffle bolts (810). Tighten to 5.4 N·m (48 lb in).

  9. Object Number: 2002589  Size: SH

    Note: Be careful not to bend or damage the lube fluid pipe.

  10. Tap the lube fluid pipe (805) with a plastic hammer into the case (10).
  11. Install the lube fluid pipe retainer (803) and tighten the lube fluid pipe retainer bolt (804). Tighten to 5.4 N·m (48 lb in).