GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 Astra 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Quarter Molding Replacement

Removal Procedure

    Object Number: 1941859 Size: LF
  1. Remove the outer rear quarter panel molding.

    2. Carefully pry off the molding with a plastic wedge (1).

    Important: Ensure that the paint is not damaged.

  2. Remove the remaining adhesive.

    3. Remove the remaining adhesive from the molding and the outer rear quarter panel with a molding adhesive remover disk (2).

Installation Procedure

    Object Number: 1950609 Size: SH
  1. Dimensions 3 door.

    2.    Important: The dimensions II and III are measured starting from the bead in the side sillboard.

    • Front Clearance--Horizontal (I) 3 mm (0.12 in).
    • Rear Clearance--Vertical (II) 213 mm (8.39 in).
    • Front Clearance--Vertical (III) 202 mm (7.95 in).

    Important: The adhesive surface must be grease and dust free.

  2. Apply the adhesive strips on the molding.
  3. Install the outer rear quarter panel molding.