GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement.

  2. Object Number: 1943848  Size: LF
  3. Remove the rubber check link seal.
  4. Partially loosen the water vapor barrier (right).

  5. Object Number: 1943763  Size: LF
  6. Remove the check link (2).
  7. • Remove the bolt (1).
    • Remove the 2 nuts (3).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.

  1. Install the check link.
  2. Tighten

        • Tighten the bolt to 20 N·m (15 lb ft).
        • Tighten the 2 nuts to 8 N·m (71 lb in).
  3. Install the water vapor barrier.
  4. Install the rubber check link seal.
  5. Install the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement.