GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Lower the molded headlining. Refer to Headlining Trim Panel Replacement.

  2. Object Number: 1936365  Size: LF
  3. Loosen the wing protective paneling inner.
  4. 2.1. Remove the 2 bolts (1).
    2.2. Remove the 8 body-bound rivets (arrows).

    Object Number: 1937625  Size: LF

    Note: For better guidance with the installation, the water drain hose is to be provided with a cord.

  5. Remove the water drain hose front.
  6. 3.1. Remove the water drain hose from sunroof.
    3.2. Remove the water drain hose from the A-pillar bottom.

Installation Procedure

  1. Install the water drain hose front.
  2. 1.1. Connect the water drain hose with cord.
    1.2. Draw in water drain hose in A-column carefully with the help of the cord.
    1.3. Remove the cord and install the water drain hose to the sunroof.

    Caution: Refer to Fastener Caution in the Preface section.

  3. Install the wing protective paneling inner.
  4. Install the 8 body-bound rivets.

    Tighten
    Tighten the 2 wheelhouse liner bolts to 2.5 N·m (22 lb in).

  5. Install the molded headlining. Refer to Headlining Trim Panel Replacement.