Removal Procedure
- Lower the molded headlining. Refer to
Headlining Trim Panel Replacement.
- Remove the front water drain hose actuation unit.
Remove the 2 hoses.
- Remove the rear water drain hose actuation unit.
Remove the 2 hoses.
- Disconnect the front wiring harness actuation unit.
Disconnect the 2 wiring harness plugs.
- Release the sunroof module assembly.
Remove the 20 screws.
- Remove the sunroof module assembly.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Insert the sunroof module assembly.
Fasten with 3 screws.
- Install the sunroof module assembly.
Tighten
Tighten the 20 screws to 5 N·m (44 lb in).
- Connect the front wiring harness actuation unit.
Connect the 2 wiring harness plugs.
- Install the rear water drain hose actuation unit.
Connect the 2 hoses.
- Install the front water drain hose actuation unit.
Connect the 2 hoses.
- Install the molded headlining. Refer to
Headlining Trim Panel Replacement.