GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 Astra 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Back Cushion Frame Replacement - Right Side

Removal Procedure

    Note: Operation identical for 3 door and 5 door without adjustable rear seat bench.

  1. Remove the rear seat backrest upholstery covering. Refer to Rear Seat Back Cushion Replacement - Right Side.

    2. Object Number: 1942245 Size: SH
  2. Remove the seat belt.
    3. • Support the seat belt lock cable.
    • Remove the bolt.
    • Remove the seat belt (arrow).
  3. Remove the cable belt lock from belt roller.

    4. Release and remove the cable.

  4. Remove the release handle panel seat backrest.

    5. Object Number: 1944570 Size: SH
  5. Remove the lock, rear seat back cushion.
    6. • Drill out the 4 rivets.
    • Pull the cable from the fastening plate.

    Object Number: 1944588 Size: SH
  6. Replace the mount.

Installation Procedure
  1. Install the lock, rear seat back cushion.
    2. • Insert the cable into the fastening plate.
    • Install the 4 rivets.
  2. Install the release handle panel seat back cushion.
  3. Install the cable belt lock to belt roller.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the seat belt.

    5. Tighten
    Tighten the bolt to 35 N·m (26 lb ft).

  5. Install the cable belt lock.

    6. Note: Operation identical for 3 door and 5 door without the adjustable rear seat bench.

  6. Install the rear seat backrest upholstery covering. Refer to Rear Seat Back Cushion Replacement - Right Side.