GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 Astra 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Front Seat Cushion Inner Trim Panel Replacement

Removal Procedure

    Warning: Refer to Fastener Caution in the Preface section.

    Note: Wait 1 minute for airbag to deactivate.

  1. Disconnect the battery.

    2. Object Number: 1941206 Size: LH
  2. Remove the front seat belt securing the panel (1).
  3. Remove the seat belt from the front seat.

    4. Remove the bolt (2).

  4. Place the seat in the most forward position.

    5. Object Number: 1941313 Size: LH
  5. Remove the rear drivers seat.

    6. Remove the 2 bolts (1).

    Note: Disconnect the wiring harness plug.

  6. Remove the front seat.

    7. Remove from the front guide.


    Object Number: 1938675 Size: SH
  7. Remove the interior paneling.
    8. • Remove the bolt (1).
    • Remove the paneling.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.

  1. Install the interior paneling.

    2. Insert the paneling.

    Tighten
    Tighten the bolt to 2.5 N·m (22 lb in).

    Note: Connect the wiring harness plug.

  2. Install the front seat.

    3. Insert into the front guide.

  3. Install the front seat, rear.

    4. Tighten
    Tighten the 2 bolt to 35 N·m (26 lb ft).

  4. Reposition the seat to the original position.
  5. Install the seat belt at the front seat.

    6. Tighten
    Tighten the bolt to 20 N·m (15 lb ft).

  6. Install the seat belt fastening panel.
  7. Connect the battery.
  8. For programming procedures, refer to Control Module References.