Removal Procedure
- Remove the condenser. Refer to
Air Conditioning Condenser Replacement
.
- Remove the dryer insert (5).
- Remove the cover cap.
- Remove the bolt (1).
- Remove the retaining plate (2).
- Remove the dryer insert cover (3).
If necessary use M6 bolt (4).
Important: Wet the sealing rings with mineral oil before installation.
- Replace the sealing rings (6).
Installation Procedure
Important: Only for vehicles with reduced dryer housing height.
- Shorten dryer insert.
Cut the dryer insert at notched point (arrow) using a suitable tool.
- Install the dryer insert.
- Install the dryer insert cover.
- Install the retaining plate.
4.2. | Attach the cover cap. |
- Install the condenser. Refer to
Air Conditioning Condenser Replacement
.