Removal Procedure
- Remove the instrument panel (I/P) compartment.
1.1. | Remove the 4 bolts (1). |
1.2. | Disconnect the wiring harness plug. |
- Remove the inner paneling on the I/P padding, lower passenger side.
Remove the 2 bolts (3).
- Remove the passenger side footwell air duct.
- Remove the body-bound rivet (2).
- Remove the access panel for the passenger compartment air filter and remove the air filter (1) in the direction of the arrow.
Remove the 3 bolts (2).
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
Note: Ensure the air filter is fitted in the correct installation direction.
- Insert the air filter and attach the access panel for the air filter.
Tighten
Tighten the 3 bolts to 5 N·m (44 lb in).
- Install the passenger side footwell air duct.
- Install the body-bound rivet.
- Install the I/P compartment.
- Connect the wiring harness plug.
Tighten
Tighten the 4 bolts to 4 N·m (35 lb in).
- Install the inner paneling on I/P padding, lower passenger side.
Tighten
Tighten the 2 bolts to 3 N·m (26 lb in).