Blower Motor Resistor Assembly Replacement for Saturn Astra 2009
Removal Procedure
- Remove the instrument panel (I/P) compartment.
| 1.1. | Remove the 4 bolts (1). |
| 1.2. | Disconnect the wiring harness plug. |
- Remove the series resistor (2) upwards from air distributor housing.
Note: Access to the wiring harness plug for release is difficult.
- Disconnect the resistor and fan motor wiring harness plugs.
Disconnect and remove the 3 wiring harness plugs (1).
- Remove the resistor.
Installation Procedure
- Install the resistor.
- Connect the resistor and fan motor wiring harness plugs.
Connect the 3 wiring harness plugs.
Caution: Refer to Fastener Caution in the Preface section.
- Install the I/P compartment.
Connect the wiring harness plug.
Tighten
Tighten the 4 bolts to 4 N·m (35 lb in).