1.1. | Remove the 4 bolts (1). |
1.2. | Disconnect the wiring harness plug. |
Remove the bolt (3).
Remove the body-bound rivet (2).
4.1. | Disconnect the 2 wiring harness plugs (1) from series resistor. |
4.2. | Remove the 5 bolts. |
Caution: Refer to Fastener Caution in the Preface section.
1.1. | Connect the clip. |
Tighten
Tighten the 5 bolts to 6 N·m (63 lb in).
1.2. | Connect the 2 wiring harness plugs. |
Install the body-bound rivet.
Tighten
Tighten the bolt - pivot and lock.
Connect the wiring harness plug.
Tighten
Tighten the 4 bolts to 4 N·m (35 lb in).