GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

    Note: Only upon replacement of servo motor.

  1. Disconnect the battery.

  2. Object Number: 1937184  Size: LF
  3. Remove the instrument panel insulator panel.
  4. Remove the 2 retainers (1).

  5. Remove the defrost valve actuator from the cam.
  6. 3.1. Remove the 3 bolts (2).
    3.2. Release and disconnect the wiring harness plug.

Installation Procedure


    Object Number: 1944531  Size: LF

    Note: Turn the cam (2). Affix adjuster tool to the adjuster aid (3).

  1. Install the enclosed adjuster tool (1).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the defrost valve actuator to the cam.
  4. Connect the wiring harness plug of defrost actuator.

    Tighten
    Tighten the 3 bolts to 5 N·m (44 lb in).

  5. Install the instrument panel insulator panel.
  6. Tighten
    Tighten the 3 retainers.

    Note: Only upon replacement of servo motor.

  7. Connect the battery.
  8. For programming procedures, refer to Control Module References.
  9. Perform the function inspection.