GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 Astra 🢒 Safety and Security 🢒 Theft Deterrent 🢒 Theft Deterrent Sensor Replacement

Removal Procedure

    Object Number: 1944541 Size: LF
  1. Release the panel for the microphone (2) and the panel for the sliding sunroof control unit (3).

    2. Release using a suitable tool (screwdriver).

  2. Remove the lens from the interior lamp (1).

    3. Object Number: 1941091 Size: LF
  3. Remove the front interior lamp holder.
    4. • Remove the 2 bolts (1).
    • Release the holder (4) all around.
    • Disconnect the wiring harness holder (2).
    • Disconnect the wiring harness plug (3).

    Object Number: 1941094 Size: LF
  4. Remove the switch with the theft deterrent sensors.
    5. • Disconnect the compact plug (1).
    • Release and disconnect the wiring harness at the compact plug (arrow).
    • Disconnect and remove the panel with the theft deterrent sensors (2).

Installation Procedure
  1. Install the switch with the theft deterrent sensors.
    2. • Install the panel with the theft deterrent sensors.
    • Insert the wiring harness in the compact plug and lock.
    • Connect the compact plug.

    Caution: Refer to Fastener Caution in the Preface section.

  2. Install the front interior lamp holder.
    3. • Connect the wiring harness plug.
    • Connect the wiring harness holder.
    • Connect the holder all around.

    Tighten
    Tighten the 2 screws to 2.5 N·m (22 lb in).

  3. Install the lens for the interior lamp.

    4. Install the 4 clips.

  4. Install the microphone panel and the panel for the sliding sunroof control unit.

    5. Install the 2 panels.