For 1990-2009 cars only
- Pull off the clip (2) from the connector (1).
- Insert the clip into the housing (3).
- Allow the clip to engage on both sides.
- Insert the connector into the housing.
- Engage the connector by applying considerable pressure.
- Inspect that the quick release coupling is properly engaged.
- Perform the tensile pull test.
Warning: Refer to Gasoline/Gasoline Vapors Warning in the Preface section.
Warning: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
Note:
• In the presence of fuel vapors or escaping fuel, observe safety regulations and national legislation. Store drained fuel in a suitable, sealable container. • The following procedure should be observed when connecting lines using quick release couplings: Fuel lines, quick-release fittings
