Charging System Test. Saturn ION 2003

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2003 🢒 ION 🢒 Engine 🢒 Engine Controls - 2.2L (L61) 🢒 Charging System Test

SA9154Z-A Starting and Charging System Tester

Step	Action	Value(s)	Yes	No
1	Did you perform the Diagnostic System Check for Engine Electrical?	--	Go to Step 2	Go to Diagnostic System Check - Engine Electrical
2	Start the engine, observe the charge indicator on the instrument panel cluster (IPC) or message in the driver information center (DIC). Does the charge indicator illuminate or the DIC display a charging system message?	--	Go to Step 3	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
3	Turn OFF the ignition. Connect the red lead of the SA9154Z-A to the battery positive terminal Connect the grey lead of the SA9154Z-A to the output circuit of the generator. Start the engine. Turn On the SA9154Z-A . Turn Off all vehicle accessories Off. Follow the SA9154Z-A prompts. Press CHARGING SYSTEM TEST. Is the voltage displayed within the specified value?	13.0 V - 15.5 V	Go to Step 4	Go to Step 5
4	Is the generator output current greater than or equal to the load test value given in Generator Usage ?	--	Go to Step 6	Go to Step 5
5	Replace the generator. Refer to Generator Replacement . Did you complete the replacement?	--	Go to Step 6	--
6	Operate the vehicle in order to verify the repair. Did you correct the condition?	--	Generator OK	Go to Step 2