GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 ION 🢒 Transmission/Transaxle 🢒 Manual Transmission - Getrag 5 Speed 🢒 Transmission Control Replacement

Removal Procedure
  1. Remove the console top cover. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  2. Remove the shift cables from the shifter assembly. Refer to Shift Control Cable Replacement .

    3. Object Number: 867994 Size: SH
  3. Remove the 2 front mounting nuts (2).
  4. Remove the 2 rear mounting nuts (3) and the shifter.

Installation Procedure

    Object Number: 867994 Size: SH
  1. Position the shifter on the studs and install the front 2 nuts (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 rear nuts (3).

    3. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).

  3. Install the shift cables. Refer to Shift Control Cable Replacement .
  4. Install the console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.