Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Key ON, engine OFF, Transmission in Park | |||
Cruise Switch | Idle/Speed Control | On/Off | On/Off |
Cruise Set/Coast | Idle/Speed Control | On/Off | Off |
Cruise Resume/Accel | Idle/Speed Control | On/Off | Off |
Cruise Clutch Command | Idle/Speed Control | On/Off | Off |
Cruise Direction Command | Idle/Speed Control | Idle/WOT | Idle |
M/T Clutch Disengage | Idle/Speed Control | No/Yes | No |
Cruise in Released State | Idle/Speed Control | No/Yes | NO |
Cruise Switch Voltage | Idle/Speed Control | volts | .5V |
Cruise Vehicle Set Speed | Idle/Speed Control | mph | 0 mph |
Cruise Delta | Idle/Speed Control | mph | 0 mph |
Cruise Brake Switch | Idle/Speed Control | Applied/Released | Released |
Stop Lamp Switch | Idle/Speed Control | Applied/Released | Released |
Cruise Move Command | Output Driver Status | On/Off | Off |
C/C Move Ckt.-Low Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
C/C Move Ckt.-Open | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
C/C Move Ckt.-High Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
C/C Direction Command | Output Driver Status | On/Off | Off |
C/C Dir. Ckt.-Low Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | TNR |
C/C Dir. Ckt.-Open | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
C/C Dir. Ckt.-High Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
Cruise Clutch Command | Output Driver Status | On/Off | Off |
C/C Clutch-Low Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | TNR |
C/C Clutch-Open | Output Driver Status | Test Not Ran/Test Pass/Test Fail | Pass |
C/C Clutch-High Volt | Output Driver Status | Test Not Ran/Test Pass/Test Fail | TNR |
