GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 878832  Size: SH
  3. Remove the wheel drive shaft heat shield-to-transmission mount bracket bolt.
  4. Remove the drive shaft heat shield-to-engine block bolt.
  5. Remove the wheel drive shaft heat shield.

Installation Procedure


    Object Number: 878832  Size: SH
  1. Install the wheel drive shaft heat shield into position on the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wheel drive shaft heat shield-to-engine block bolt.
  4. Tighten
    Tighten the bolt to 30 N·m (22 lb ft).

  5. Install the wheel drive shaft heat shield-to-transmission mount bracket bolt.
  6. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Lower the vehicle.