GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 ION 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Hydraulic Clutch Hose/Pipe Replacement

Removal Procedure


    Object Number: 851233 Size: SH
  1. Disconnect the clutch line at the clutch actuator cylinder and drain the fluid into a suitable container.
  2. Remove the UBEC. Refer to Underhood Electrical Center or Junction Block Bracket Replacement in Wiring Systems.

    3. Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

  3. Place a shop towel under the clutch master cylinder in order to catch any additional fluid loss.
  4. Disconnect the clutch line from the clutch master cylinder.
  5. Remove the clutch line from the vehicle.

Installation Procedure

    Object Number: 851233 Size: SH

    Important:  Ensure that the clutch line locks securely in place.

  1. Connect the clutch line to the clutch master cylinder.
  2. Connect the clutch line to the clutch actuator cylinder.
  3. Remove the shop towel and discard in a suitable container.
  4. Install the UBEC. Refer to Underhood Electrical Center or Junction Block Bracket Replacement in Wiring Systems.
  5. Fill the brake/clutch reservoir with DOT 3 hydraulic fluid to the proper fluid level.
  6. Bleed the clutch hydraulic system. Refer to Hydraulic Clutch Bleeding .