Removal Procedure
- Remove the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the shift cable from the shift
control assembly.
- Remove the shift control nuts.
- Disconnect the shift lock solenoid harness connector.
- Remove the shift control from the vehicle.
Installation Procedure
- Install the shift control to the vehicle.
- Connect the shift lock solenoid harness connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the shift control nuts.
Tighten
Tighten the shift control nuts to 25 N·m (18 lb ft).
- Connect the shift cable to the shift control
assembly.
- Install the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.