Tools Required

J 39400-A Halogen Leak Detector

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



3. Remove the pressure relief valve from the compressor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the pressure relief valve and seal to the compressor.

Tighten
Tighten the compressor pressure relief valve to 7 N·m (62 lb in).

2. Lower the vehicle.
3. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
4. Leak test the fittings using the J 39400-A .