Important: Make certain that the orifice plate is correctly positioned in the HVAC module. Make certain that the lower HVAC case is properly positioned and is fully seated on the HVAC module before installing the screws. Be sure to install all lower HVAC case screws.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the screws to 1.8 N·m (15 lb in).
Important: Make certain that the heater core cover is properly positioned and is fully seated on the HVAC module before installing the screws. Be sure to install all heater core cover screws.
Tighten
Tighten the screws to 1.8 N·m (15 lb in).
• | The defrost duct seal |
• | The HVAC module to cross car duct seal |
• | The center air outlet duct seal |
• | The center floor air outlet duct seal |
• | The air inlet seal |